i didn't exactly get and figures or plushies but i got a lot of books and other collectable things. i was expecting the shipping to be worse as it originally said 100$ after consolidating the packages to put it all into one box. i am so happy for the things i got.
If you can wait 2-3 months, just do surface mail aka sea shipping.
>>94 i wish it showed as a option. i would have
>>97 You want to use a smaller service for that. The big boys aren't exactly concerned with you saving money.
I got a strike on my Mandarake account for some manga sets because I forgot to only use SAHRA warehouse and they slapped me with £200 shipping on £60 worth of goods! Not to mention this stupid island will charge me an additional "import fee", which is where you pay a guy at the Royal Mail sorting office to open your package, move everything around, and re-seal it...
gonna try doing this grage kit. i didnt know this was from a really gay anime.. i just got it bc it was super cheap. i took all the pieces out and dumped them into a ziplock back filled with degreaser. as these are resin casted, it will still have the grease used to have it break away from the mold it was in. naut doing that will result in primer not sticking or sticking but months later flake off. some people say when shaving down/sanding out seam lines that it will put resin dust in teh air and that is bad bad bad to breath in..i dont have a resporator nor gonna do it outside as i dont think its that bad, maybe i will wet sand it so it less bad. i do all of teh work in my room so it might be bad. i do have a hose conected to the outside and can suck with it pretty good so i might use that and show it off too (＾Д^)
i sliced my finger. its better now but it was about a inch long. and lucly not bleeding mucj. i took out out teh degreaswr and washed them ir water and dried them. then with wirecutters and a exscto knife, i went cutting and scraping the imperfections. and hand slipped when scrapping snd.
naut a good idea. i couldnt sleep last night. maybe its bc of toxic resin.. idk prob also should naut do it next to bed
you're braver than me there's a lot of stuff I don't do because I don't have any kind of mask or vent system...
i might fallow the sculpting book and make the character there before making nau or heyuri tan or aroe or alva or any other things you guys want me to try and make. one issue i had was the armature, its take a bit of skill or know how to bend the aluminum wire to how you want, and then connectinng them i used super glue and masking tape... witch i prob should have sanded it some and used my soldering iron to really stick em togrther. for anon wanting to know the clay i am using la doll. but really most air dry clay would be perfect, so long as u see jp ppl use it? check back later and i will tell u how the clay is when i use it. it says stone powered clay. most japs u see on YouTube use airdry clay like i mentioned. here is a comment i read "I use a wide variety, i use mr.clay, i also use padico they are both air dry clay, i also use epoxy clay like apoxie." padico band one is the LA doll one i going to use one thing i think is good about the air dry clay is no kiln and you can make the body first and wait for it to dry and then make cloth and wait for it to dry. one thing i don't understand is how to section off parts... but in the book they literally just use a saw and cut off the arms and legs.. but it should help sanding and cutting out cracks to refill with clay. also painting, and sectioning off is good to make molds and creating a marketable figure. in the book they have a thick grey primer. (iirc mr surfacs 1000) and it will help show imperfections to sand and since its thick i believe also fill in sometoo
when dry it shavs up pretty well. ima try to maek progress tonight!
i attempted to retry armature and make body again with left over clay here >>146 i made the distance between legs and arms to long.. not only that but old clay dried super quick so there was quite a bit of cracks forming, the way i did the armature also sucked and the connected pieces kept sliding around and not staying put. so the shoulder is not centered. i bought special solder to test soldering armature instead of glue and tape. i will do garage kit soon.
>>147 this is the new shape of it. i shave a lot of it down and resized some things
this was from yesterday. i did no work on it tonight.. besides shaving the back to make it more curved
she came.. naut tama chan but its from same set
That hand
squishy and soft looking
Anyone here into Gunpla? Here are mine. ヽ(´ー｀)ノ I had more, but I lost one, and one fell. Both of these have some random other parts I had lying around on them -- the one on the right is 99% just an original Gundam, but the one on the left had this super flimsy and hard to pose wing unit that I replaced with the wings from Fellini's Gundam in Gundam Build Fighters. Sadly, that one is snapped in half and I don't know where it is, I put it aside to glue together ages ago, and now I don't know what happened since..... aaaaaaa. Both are unpainted since I don't have any real place that I can paint. Living in a condo sucks. ( ´ω`;) I really should buy more. ( ´ω`)
>>116 for a long time, gunpla had to be glued and painted, but it has been decades since then and newer gunpla are designed to be very easy to build, especially anything within the last 14 or so years but no, there are all kinds of cool painting things people do, and there are competitions for customizing gunpla you can be a snap-builder and enjoy it that way, or you can go all in
my gloss came on teh mail and it had pictures of gunpla it seems
aaaaaaaaaaaa it's so good
every time I see a super-pretty gunpla I really wish I had a proper work area so I could paint and the lot (;´Д`) this is stunning work (´人｀)
do you have any fav artist or figure sculpture? i like pop's artwrok so much. i like blocky feet and long dresses that are lolita fashion. big comfy clothing.anything that is old school scene style. i miss old anime look.
blocky feet like moetan tho i guess that fits into scene style or maybe gothic platform shoes
I dunno if I have a favorite artist. That being said, I've loved Murata ever since seeing his work in Groove On Fight for Saturn. He draws a ton of rugged guys and cute girls and has great backgrounds. Some of his work is a little much for nashi (like POP) but it's generally stylish and tasteful.
well my clay came before my garage kits... so i guess i will make ugly figures first. i bought mostly Japanese stuff like the clay, primer, gloss, finisher, masking tape, putty. i just wish my figures will turn out like one on left... it was a little difficult finding what type of clay and other stuff to get from literally knowing noting and failing art in highschool. recently my friend graduated from art school so i am going to pay them for concept art of nau to better model stuff
maybe... its naut worth it if you are not wanting to get the Japanese suff, my Europe friend who graduated art school even said "pretty fucking hard, I made this little guy once(file). it was pretty easy because he is tiny and doesn't really have limbs XD but I tried to do a russia chan, now that was difficult. you gotta have legit tools for figurines" they also said they wish they had metal rods they use for support and "use those that the jp use. many of the clays are straight ass" but yeah to get my hands on the airdry clay teh japs use was like 20$ for about a pound. and pack of sculpting spatula use in the video was about 20$ too, (could have honestly spent like 7$ but wanted the same tools) then the brushes... masking tape.. primers.. metal wire.. acrylic. primer. varnish, gloss, pastels, masking tape. and prob a set of other 6 tools i bought but forgot to mention. it cost really money (;´Д`) putty, clips, glue, more putty, potrolum jelly, pin vice, sand paper.., acrylic paint thinner. but its all bought! so i will soon be making a figure. start simple nau and then do heyuritan and salva. and if it still sucks then its okay as its OC ヽ(´∇`)ノ
running into a issue with the wire i bought. i got galvanised steel wire for teh grage kits but it is to strong for making sculping. i need aluminum witch is softer and more light weight. i can still bend the galvanized wire but wow. its a pain
i did order better wire and a cutting/sculpting mat. (it was jut a regular craft mat that JP said works as good. after studying mats. just having glass like surface is absolute best for clay. but craft cut mats works as good,. tho i dont have a rolling pin （ ´,_ゝ`）) >>132 please wait until i try. its hard to resist. but as a person who cant even draw. -> https://oekaki.nashikouen.net/potiboard.php?res=3 https://oekaki.nashikouen.net/potiboard.php?res=17 https://oekaki.nashikouen.net/potiboard.php?res=28 https://oekaki.nashikouen.net/potiboard.php?res=175 you should wait untill i make at least 2-3 figures.... if i do not deliver 3. then take ur best judgement. as links above is what i do compared to time and quality.... as i never done art seriously until nashi...
>>135 fair enough what brand of clay did you get (say it after you've started working with it though)
i bought about 5 different garage kits. 3 of witch are ones i absolutely CAN NOT fuck up, one being OP pic. is there any important things i should worry about? i spent about 160$ or 170$ on just materials alone. one thing i belive i am gonna need is masking_ putty and that weird eraser thing people use on the eyes. i kinda have a advantage in some ways as i have a microscope. (that i yet to have posted on /unix/ due to waiting for a lens) teh long game is to be able to sculpt and create my own garage kits. having a heyuri-tan&aroe&nau figure
>>113 i mean i got one figure that was 15$ in the set of 4. i really belive i can do good my first time. except for the eyes. i studyed even harder nao! 3 hours of watching youtube and not just 2!(・∀・) i think i can maek it really nice. and if i dont. it will stilll be better then some stuff i seen online.
its nao being shipped! using ecms instead of sea mail, bc i also got a little glass cup i think you guys would love!
>>117 nice! how bad was the shipping cost vs sea mail?
it was like 10ish dolkaes more so i got the better one bc it has glass ib it
share cute figures dolls and plushies from teh gr8 2ch and stuff
Mecari i think! https://buyee.jp/?lang=en some anon needs to maek a guid to getting cheap dolls here. as i think buyee or mecari is what you need
>>27 https://buyfags.moe/So_you_want_to_be_a_buyf/a/g%3F Checking out the wiki would be a start.
>>23 you forgot to quote the file name
>you forgot to quote the file name Sorry, >toko toko dansu.jpeg TEH NIGRACAT(DONT CALL THE CATS NAMES!!!)
finally , my time to shine ....... : O ) figures ? BJDs? blythes? sylvanian families ? other random niche doll models and brands ? doesnt matter..... ^____^ (etokochan nurse costume produced by marmit)
>>75 i love sylvanian families so much T__T i only have 2 sets though they are really expensive. sheep family and fashion playset with the mouse
>>78 waow i sure wonder who got u that sheep set . . bet they r super cool . .
>>79 the sheep r courtesy of alex :o3
>>81 omg RLY that's crazy
dose any one here use my figure collection? I don't actually have any figures or an account but i do use it to browse animes and things i find really cute. this girl is really expensive i wish i could have her.. she also has a sound track with her. https://myfigurecollection.net/item/5600 https://youtu.be/7eXVM_eslfA that is my fav song from the songs
i use it all the time!!! usually find the imgs i use on here from searching the tag nurse and original character LOL
I use MFC but don't have an account. That place is for rich people.
/doll/ is to inactive and in threat of being shut down. the shutdown will happen around the time of squid girl watch party.. ;_;
Ill miss it ;__;7
i mean if this board was more active then it can stay..
This counts as being active, right?
Where else are you supposed to go to get your doll fix on the chans?
post ur figures. Picrel is one i posted elsewhere, i can't be bothered to taek another pic
fine here is a "better" image
>>63 when i zoom in isee squares... the resolution needs to be 800x higher
These are my roommates that live beside my desk, I have a Nagato on my desk in between my monitors, she likes it there.
>>67 ah, it's so nice to see another Hazuki fan ヽ(´∇`)ノ
has any one ever made there own plushies? i have had many ideas on ones i wanted to make but never knew how and worried they would come out bad it seems like ADVANCE craft work that takes a background of being a female who has been making bracelets since they where 7 or took a sewing class. i wanna make a aroe plushie!
┐(ﾟ～ﾟ)┌
I kind of want to give plushmaking a try myself. I guess you'd look up a youtube tutorial and follow along to not just stumble blindly, but I have no recommendations or suggestions. could do something with felt too for easiness's sake ヽ(´∇`)ノ
i maybe cant say anything , cuz i am kind of this demographic >who has been making bracelets since they where 7 or took a sewing class. (both) but sewing + plushies + everything else 'crafty' is a lot easier than it looks ^_^ depends on if u prefer machine sewing or hand sewing. by hand is easier (usually) but machine is a lot stronger but more expensive. if people actually cared i wuld luv 2 talk more about sewing here ! maybe post sum patterns. ^_^ i have been wanting 2 sew lately , maybe i can chronicle
salva art in any form sounds fun!! i would love to see patterns!
Where do can I buy french dolls?
france
what type are u looking for ? (❁´◡`❁) assuming from picture older/antique porcelain dolls. id try ebay or some other resale sites. its morbid to say, but anywhere where people post listings after going through dead people's belongings is probably where you will get the best...
if you dig a little deeper into what you want, you might find some old manufacturers/brands and that would also help searching. stuff like that tends to have a central 'style' to it that stretches across all their products like an art style i guess
if youre looking for porcelain dolls i recommend Julie Good-Kruger. i have sugar and spice that i got at a consignment store that are now displayed by my window :D
